No. 15335: "Third Hand" Work Holder
Flexible arms may be placed in any orientation. Holds items during soldering, embedding, assembly, etc. Arm length 5". Heavy iron base for stability
No. 15336: Work Holder
Similar to No. 15335, but has only one arm.
No. 15302: Panavise With Vacuum Base
Suction mechanism permits vise to be mounted on any flat, rigid, nonporous surface, such as glass or Formica bench tops.
No. 15300: Panavise
A small vise ideal for general laboratory use. Clamping head tilts up to 90° and swivels 360°. Replaceable nylon jaws open to 21⁄4".
No. 15303: Steel Jaws
Replacement jaws for No. 15300.
No. 54270: Pin Vise With Straight Needles
No. 54280: Pin Vise With Angled Needle
Stainless steel needle with approximately 10um tip. Held in a brass pin vise. For probing, fine scribing, orifice cleaning and similar fine work. 3.094" long. One pin vise and package of 10 needles.
No. 54271: Replacement Straight Needles Approximately 1.1/2" long. Pkg/10.
No. 54281: Replacement Angled Needles Approximately 11⁄2" long. Pkg/10.
No. 11323: Pin Vise And Sharpened Needle
For specimen manipulation or marking photographic negatives. Many other uses. Similar to No. 54270, but with stiffer non-stainless needle. Steel collet in knurled brass handle.
No. 11350: Sharpened Needles
Specially sharpened needle. Use with No. 11323 Pin Vise, No. 11400 EFFA Specimen Marking Pin, or No. 15840 EFFA Micromanipulator. For general use where a very hard, sharp point is required. Pkg/10.
No. 54205: Pin Vise With Long Handle
Standard pin vise fitted with 5" long aluminum handle. Light weight, comfortable and easy to use. Hexagonal handle won't roll on a bench top.
No. 54291: Angle Tip Teasing Needles
Heavy steel needle approximately 2" long with wooden handle. Pkg/12.
No. 54206: Ultra-Fine Manual Probe
Long-handled pin vise with etched tungsten probe. 0.6um tip radius.
No. 15863: Replacement Tungsten Probe.
No. 14850: Peg Block And Loop
Convenient for holding grids while placing films or sections on grids. Also for drying the specimens after mounting. Heavy 6 oz. base. Ten removable stainless steel pegs with tweezer pickup grooves for easy removal. Loop is nickel-plated brass.
No. 14851: Peg Block Loop
For picking up sections or replicas for transfer to grids. Nickel-plated
brass.
7" long.
No. 54200: Fine Wire Specimen Loop
Wire loop in a pin vise for picking up sections from knife boats. 5mm dia. loop. 10cm long. Loops are non-corroding nichrome wire.
No. 54201: Replacement Loops, Pkg/5.
No. 54210: Section Pickup Loop
For transferring sections from water surface to specimen screens. 6" long.
No. 14750: Speedles
Miniature needle-like spatulas with five different blade sizes. Handles are color coded for easy identification. Ideal for making micro dispersions directly on SEM specimen stubs. Properly shaped for applying micro amounts of adhesive for tacking down specimens. Useful for specimen manipulation under the light microscope. Set of five with blade widths ranging from 0.25 to 1.0mm Length 21⁄2" overall.
No. 54250: Micro Picks And Probes
Five assorted stainless steel instruments with needle sharp tips. Ideal for use when working under a light microscope with tissue, fine particles, fibers, and semi-conductor devices. 6" long. Set/5.
No. 15330: Triceps
For manipulating small parts and reaching into inaccessible places. Retracts automatically. 31⁄2" long.
No. 54220: Thin Section Brush
A single fiber brush for manipulating thin sections on a water surface. 6" long hex shaped aluminum handle will not roll off the bench.
No. 54230: Camel Hair Brushes
For application of paraffin, specimen manipulation, cleaning and many
more uses. 7½" long.
Pkg/12.
No. 54430: Scratch Brush Set
For cleaning metallographic specimens or other hard surfaces. Includes interchangeable brass, steel, nylon and fiberglass brushes. 41⁄2" long. Set/4.
No. 53850: Micro Spatula
Curved pointed blade at one end and v-shaped spoon at other end. Stainless
steel. 6¼" long.
