Mounts

SEM Mounts

Mount Lifters

Related Products

Planchets

Pin-Type, Multi-Mini, Silicon Chip, and Spring Clip Mounts

SEM Mount Storage Boxes

Tape, Cement, Paints, and Sticky Tabs

AFM Mounts

No. 18350: Park Scientific AFM Mounts
Aluminum. 12.5mm dia., 3mm pin, pkg/10. . . . .$11.85

SEM Mounts

No. 18365: 10mm Stub, 32mm Surface
For most JEOL, ISI/Topcon, and Cambridge holders. Actual diameter 31.75mm.
Fits ¼" metallographic holders, pkg/10. . . . .$26.50

No. 18370: ¹/8" Pin, 1" Surface
Pin ⁷/16"L. For AMRAY 1000, 1200, pkg/10. . . . .$16.65

No. 18380: ¹/8" Pin, ½" Surface
Pin ½"L. For AMRAY 1400, pkg/10. . . . .$8.65

No. 18400: ¼" Pin, ⁹/16" Surface
Pin ⁹/16"L. For AMRAY 900, pkg/10. . . . .$17.50

No. 18420: ¹/8" Pin, ½" Surface
Pin ⁷/16"L. For Amray SEMs from Model 1000 on except 1400, pkg/10. . . . .$5.75

No. 18440: ¹/8" Pin, ½" Surface
Pin ⁵/16"L. For Cambridge Mark I, II, IIA, Stereoscan 150, 180, 600, Balscan, ETEC, Phillips, Novascan, Cameca MBX Microprobe, pkg/10. . . . .$5.75

No. 18460: 1¼" Flat Surface
For Cambridge S4, S4-10, LEO 1500 series, each. . . . .$4.30

No. 18500: ³/8" Pin, ¾" Surface
Pin ⁵/16"L. For Coates and Welter, Nano Quick Scan II, and Nanometric, pkg/10. . . . .$12.65

No. 18520: 13mm Stub, 15mm Surface
For some Hitachi models, pkg/10. . . . .$13.00

No. 18540: Copper ³/8" Stub, ³/8" Surface
For JEOL T-20, 50A, U-2, U-3, pkg/10. . . . .$21.00

No. 18560: Aluminum ³/8" Stub, ³/8" Surface
For JEOL T-20, 50A, U-2, U-3, pkg/10. . . . .$6.30

No. 18550: 10mm Stub, 12.3mm Surface
For JEOL JSM-820, JSM-840, 6400, pkg/10. . . . .$11.45

No. 18570: Carbon Bulk Specimen Holder, 25 x 6 x 3.4mm
For JEOL 100CX, each. . . . .$4.25

No. 18575: Carbon Bulk Specimen Holder, 20 X 6 X 2.5mm
For Hitachi 7000, 8000 & 9000, each. . . . .$5.75

No. 18580: ½" Stub, ½" Surface
For MAC, pkg/10. . . . .$17.70

No. 18660: 10mm Stub, 15mm Surface
For ISI/Topcon, pkg/10. . . . .$13.80

No. 18670: 10mm Stub, 15mm Surface
For Hitachi H-300, 800. Hitachi 2500 with your adapter. M4 tapped hole on back side.
Pkg/10. . . . .$18.35

No. 18680: 5mm Stub, 15mm Surface
For ISI/Topcon and JSM-1. Pkg/10. . . . .$12.90

No. 18690: 10mm Surface
Replaces the threaded mount and holder on ISI/Topcon High Resolution Stages.
Pkg/10. . . . .$17.65

No. 18700: 10mm Stub, 26mm Surface
For Hitachi HSM-2, SSM-2 & HHS-2R. Fits most microprobes.
Pkg/10. . . . .$15.80

No. 18740: 10mm Stub, 14mm Surface
For Hitachi HSM-2, SSM-2 & HHS-2R.
Pkg/10. . . . .$13.85

No. 18770: Flat Stub, 26mm
5mm H. For Hitachi S-400, S-500 S-800, S-2700 and S-4000 series. M4 tapped hole on back side, pkg/10. . . . .$22.50

No. 18780: Flat Stub, 15mm
Same as No. 18770, but with 15mm diameter, pkg/10. . . . .$19.95

No. 18790: Hitachi Mount Adapter
Adapt pin type mounts to Hitachi SEMs. 15.8 x 30mm. Other lengths available on request.
. . . . .$32.00

Mount Lifters

No. 17900: SEM Mount Lifter, ¼"
Curved tips can be bent to pick up pin mounts up to ¼" diameter. Stainless steel, anti-magnetic. 4" long. . . . .$16.50

No. 17901: SEM Mount Lifter, ¹/8"
For handling ¹/8" pin mounts with large diameter heads. Also recommended for Amray or other pin-type mounts with no groove in the head. . . . .$14.75

No. 17910: SEM Mount Lifter, ½"
Curved tips can be bent to pick up SEM mounts up to ½" diameter. Fits No. 18380 and 18440. Stainless steel, anti-magnetic. 4" long. . . . .$17.75