No. 15840: Micromanipulator
For use under the light microscope where fine, precise movement is
required. Mounted on rugged benchtop stand for close use in any desired
position without interfering with the operation of microscope stages. Vernier
controls provide motion in X and Y axes. The main body provides coarse
and fine vertical motion. For moving, deforming picking up, injecting or
otherwise treating a sample under observation in the light microscope.
Useful for accurately placing microdrops on microscope grids. Also useful
for placing probes for measurements on semi-conductor devices. Maximum
effectiveness is obtained with the use of a mechanical stage and cross-hair
eyepiece on the microscope. X motion: 30mm; Y motion: 50mm; Z motions:
coarse-60mm, fine-1.5mm. Rough adjustment on dovetail slide: 3".
No. 15841: Micromanipulator With Vacuum Tweezer. - Discontinued
No. 13400: EFFA® Microdotter
- Discontinued
Provides a simple method of marking a specimen under a light microscope
for later relocation under a microprobe or SEM. Interchangeable with standard
objectives of most light microscopes. A small quantity of phosphor solution
is included for highlighting marks. 2½" long.
No. 11400: EFFA® Specimen Marking Pin
- Discontinued
Replaces objective lens on light microscope. Floating, sharpened needle
is placed in contact with specimen using fine focus adjustment. Produces
a reference mark a few microns wide in the immediate vicinity of the structure.
Instructions included.
No. 11410: EFFA® Specimen Or Screening Marker
- Discontinued
Useful for marking a 3mm diameter circle on sheet screening, foils,
films, etc. Interchangeable with objective lens of light microscope. Can
be used with ink stamp pad for marking glass slides or coverslips.
Measuring standards suitable for all light microscopes. The micrometer scale is a disc mounted on an anodized slide, 76 x 26mm. The primary use of micrometers is to calibrate eyepiece reticles.
No. 35250: S8 Stage Micrometer For Transmitted Light
- Ted Pella, Inc. Order Code #2280-13
Has micro-coverglass over the scale. 1.00mm in 0.01mm increments. For
microscopes with built-in coverglass compensation.
No. 35000: F7 Focusing Eyepiece
- Discontinued
Fits most standard monocular microscopes. Specially designed to receive
eyepiece reticles of 16mm diameter. Allows the graticule image to be brought
into sharp focus when superimposed on the object image, which is often
difficult to achieve with fixed focus eyepieces. The graticule is held
by a screw-on retaining ring and is easily removed for cleaning or replacement
with another pattern.
No. 35050: M4 Adapter Rings
- Discontinued
Adapter rings are available to adapt standard (16 or 21mm) reticles
to various size eyepiece tubes. To order, state inside diameter of eyepiece
tube and 16mm or 21mm reticle.
| Internal Diameter of Eyepiece Tube | Graticule Required |
| 17mm | 16mm |
| 18mm | 16mm |
| 19mm | 16mm |
| 20mm | 16mm |
| 22mm | 16mm or 21mm |
| 23mm | 21mm |
| 24mm | 21mm |
| 26mm | 21mm |
| 27mm | 21mm |
| 28mm | 21mm |
Eyepiece Reticle (Made by Graticules, Ltd.)
Micrometer scales, grids, circles and selected designs suitable for
use in the microscope eyepieces. Black surface metal patterns.
NE17 Crossed Micrometers, 10mm in 0.1mm increments.
No. 35161: 16mm diameter.
- Discontinued
No. 35162: 21mm diameter. - Discontinued
NG1 Patterson Globe And Circle, Grid length: 4.5mm
No. 35181: 16mm diameter.
- Discontinued
No. 35182: 21mm diameter. - Discontinued
NE10A Indexed Squares, 0.5mm grid squares.
No. 35171: 16mm diameter.
- Discontinued
NE35 Indexed Squares, 1mm numbered 10 x 10mm grid squares.
No. 35191: 16mm diameter.
- Discontinued
No. 35192: 21mm diameter. - Discontinued
No. 53880: Cargille "A" Immersion Oil
- Ted Pella, Inc. Order Code #19552
Contains no PCBs. Low viscosity, low fluorescence. Refractive index=1.5150,
bottle/120cc.
.
No. 53890: Cargille "B" Immersion Oil
- Ted Pella, Inc. Order Code #19556
Higher viscosity than No. 53880. Used in medical work, bottle/120cc.
Forceps, and Needles for Manipulating Slides and Coverslips
No. 14510: Kirkbridge Slide Holding Forceps
- Discontinued
Hold standard microscope slides while staining, coating, or heating.
Nickel plated steel. 3½" long.
.
No. 54291: Angle Tip Teasing Needles
- Ted Pella, Inc. Order Code #13550
Heavy steel needle with angled tip, approximately 2" long with wooden handle. Pkg/12.
No. 54270: Pin Vise With Straight Needles
- Ted Pella, Inc. Order Code #13561
No. 54280: Pin Vise With Angled Needles
- Ted Pella, Inc. Order Code #13562
Stainless steel needle with approximately 10um tip. Held in a brass
pin vise. For probing, fine scribing, orifice cleaning and similar fine
work. 31/8" long. One pin vise and package of 10 needles.
No. 54271: Replacement Straight Needles
- Ted Pella, Inc. Order Code #13561-10
Approximately 1½" long, pkg/10.
No. 54281: Replacement Angled Needles
- Ted Pella, Inc. Order Code #13562-10
Approximately 1½" long, pkg/10.
No. 14735: Superfrost Slides
- Ted Pella, Inc. Order Code #260100
Glass microscope slides with a coated surface at one end. Coating will
take pencil, ballpoint, felt tip or stamp pad ink. Can also be scribed
or engraved. Coating is resistant to common laboratory solvents, box/72.
No. 11383: Microscope Slides
- Ted Pella, Inc. Alternative Product #260441
Fisherbrand microscope slides 75mm x 25mm. Precleaned, excellent quality,
box/72.
No. 14730:
Esco Coverslips
- Ted Pella, Inc. Alternative Product #26023
Number 2 round glass coverslips. 0.17-0.25mm thick. 13mm diameter.
Useful for SEM studies or for conventional microscopy, pkg/approx. 102.
No. 14731: Fisherbrand Coverslips
- Ted Pella, Inc. Alternative Product #260369
Number 1 round glass, 0.13-0.17mm thick, 22mm diameter. 1 oz.
No. 52895: Slide Box Cabinet
- Ted Pella, Inc. Alternative Product #2229
Welded steel frame with transparent drawers holds 108 glass slide storage boxes. The polypropylene boxes measure 79 x 67 x 32mm and each holds 20 slides. Each drawer holds 27 boxes. Outside dimensions: 12.75" x 14" x 15.75"
deep. Cabinet only.
No. 52896: Slide Box Cabinet
- Ted Pella, Inc. Alternative Product #2229
Welded steel frame with transparent drawers with 108 glass slide storage boxes. The polypropylene boxes measure 79 x 67 x 32mm and each holds 20 slides. Each drawer holds 27 boxes. Outside dimensions: 12.75" x 14" x 15.75"
deep. Specify clear or black slide boxes.
No. 52891: Black Light Tight Slide Boxes, pkg/20. - Ted Pella, Inc. Alternative Product #2108-6
No. 52890: Clear Slide Boxes, pkg/20. - Ted Pella, Inc. Alternative Product #2108-1
No. 52870: Microscope Slide Boxes
- Ted Pella, Inc. Alternative Product #22518
Polyethylene boxes with snap cover. Holds five microscope slides. Convenient
for storing or mailing. Pkg/25.
No. 52880: Slide File Box
- Ted Pella, Inc. Alternative Product #2105
For filing microscope slides. Molded of high impact polystyrene. Numbered
cork pad in bottom. Holds 25 slides.
No. 18120: Surface Section Cutting Block
- Discontinued
A 1¼" diameter two piece block which permits slicing and direct observation
of cross-sections of papers, textiles, etc. Nickel-plated brass, ¾"
high. Includes package of single edge razor blades.
.
No. 15835: Low Temperature Heating Stage For Light Microscopes
- Discontinued
Heats a sample on a light microscope to a maximum temperature of slightly
above 200° C. Bottom pad of stage measures 1" x 3" and will fit the
slide grippers of most microscopes. Includes water cooled heat sink and
power supply.
No. 35330: Illuminated Pocket Magnifier
- Ted Pella, Inc. Alternative Product #741-10
High quality 10X Bausch & Lomb Coddington magnifier with 20mm field.
6" long. Two "AA" batteries included.
No. 35332: Folding Pocket Magnifier
-Discontinued
The widely known 10X Hastings triplet magnifier by Bausch & Lomb.
Shock-resistant plastic lens carrier.
No. 15395: Maxta Measuring Magnifier
- Ted Pella, Inc. Alternative Product #749
8X magnification, with focusing eyepiece. Has 25mm scale in 0.1mm increments
and 1" scale in 0.005" increments. Other graticules available on special
order.
