Spectroscopically Pure Carbon
Presharpened Carbon Rods
No. 12410: ¼" dia. x 2¼" long, tip 1mm dia. x ¼" long.
Pkg/10.
No. 12420: 1/8" dia., 2¼" long.
Pkg/10.
Unsharpened Carbon Rods
No. 12020: ¼" dia., 6" long, pair.
No. 12021: ¼" dia., 12" long, each.
No. 12030: 1/8" dia., 6" long, pair.
No. 12031: 1/8" dia., 12" long, each.
Recessed Carbon Rods
Both Ends Drilled To Fit Carbon-Platinum Points
No. 12440: ¼" dia., 2¼" long, pkg/10.
No. 12450: 1/8" dia., 2" long, pkg/10.
No. 12000: Carbon Evaporation Kit
For evaporating carbon under vacuum in other evaporators. Holds two
rods with constant spring tension to maintain contact. Threaded support
rod, wire braid lead and instructions included. For ¼" diameter rods.
One rod included.
No. 12005: EFFA® Carbon Evaporation Kit
Same as No. 12000. For mounting on EFFA® evaporator ports.
No. 12010: Carbon Evaporation Kit
Same design as No. 12000 for 1/8" diameter rods. For use with other
evaporators. Includes one rod.
No. 12015: EFFA® Carbon Evaporation Kit
Same as No. 12010. For mounting on EFFA® evaporator ports.
No. 12360: EFFA® Mini-Carbon Kit
Compact carbon evaporation kit for the evaporating ¼" rods. Ideal
for small or crowded vacuum evaporators. Instructions and one rod included.
No. 12460: Carbon Rod Recesser
Chrome plated device for recessing ¼" carbon rods to take carbon
platinum points. Internal twist drill bores out recess. Adjustment wrench
included.
Ceramic Insulators
Replacement insulators for carbon, boat and basket kits.
No. 12001: Ceramic Insulator
Replacement insulator for Nos. 12000, 12005, 12010, 12015 and 12360
Carbon Evaporation Kits.
No. 12301: Ceramic Insulator
Replacement insulator for Nos. 12300 and 12310 Tungsten Basket Kits.
No. 12321: Ceramic Insulator
Replacement insulator for Nos. 12320 and 12330 Boat Kits.
Note: No. 12370 Aperture Cleaning Boat Kit uses eight No. 12301 insulators.
Support Rods and Clamps
Support rods and clamps for other kits or instruments of customer's
choice.
No. 12125: Clamp
11/16" dia. x 13/16" with thumbscrews for support rod and instrument.
Holes are ¼" and 7/16" at 90° spacing.
No. 12110: Threaded Support Rod
1/4"-20 thread to screw onto terminal in evaporator. 6" long.
Support rods can be made to order in any length, with any suitable
threads.
No. 12185: Effasol Bell Jar Cleaning Aid
Solution dries to form a stable, water soluble release layer. Bell
jars can be quickly cleaned with a wet sponge. Reapply after cleaning.
250ml squeeze bottle.
No. 12660: Dow Corning Vacuum Grease
Silicone-based grease for vacuum sealing and lubricating. 5.3 oz. tube.
No. 12670: Apiezon M Vacuum Grease
A good high vacuum grease. Vapor pressure 2 x 10-9torr
at 20°C. Suitable for electron microscopes, evaporators and associated
vacuum instruments. Excellent as a lubricant for general use throughout
the laboratory. 1 oz tube.
No. 12511: Dark Viewing Glass
For viewing carbon or tungsten filaments during evaporation. 2" x 4¼".
Tungsten Wire Baskets and Basket Kits
Made from high purity 0.020" tungsten wire. Leads are 35mm long. Overall
length is 70mm. 4mm inside diameter.
No. 12800: Tungsten Baskets
Intermediately wound into eight turns. 8mm H, pkg/20.
No. 12300: EFFA® Tungsten Basket Kit
Holds tungsten baskets for vacuum evaporation of wires or large particles.
Includes one package of No. 12800 baskets, threaded 1/4"-20 support
rod, braided lead, and instructions. For use with other evaporators.
No. 12310: EFFA® Tungsten Basket Kit
Same as No. 12300, without support rod. For use with EFFA® evaporators.
No. 12301: Replacement Ceramic Insulators.
Tungsten
No. 16220: Tungsten Wire, 0.025" diameter, 10 ft. long.
Aluminum, (99.99%)
No. 12280: Aluminum Wire, 0.015" diameter, 10 ft. long.
Precious Metal Wire
For use in evaporation and shadowcasting techniques. Packed in plastic
dispensers. All wires listed below are 0.008" diameter, unless noted otherwise.
Platinum 100%
No. 12240: 2 ft. long.
Gold 60%-Palladium 40%, 0.010" dia.
No. 12220: 2 ft. long.
Palladium 100%
No: 12230: 2 ft. long.
No. 12320: Tungsten Boat Kit
Holds tungsten boats for evaporation of powders or for cleaning disc
apertures. Includes six No. 12130 tungsten boats, threaded 1/4"-20 support
rod, braided lead, and instructions. For use with other evaporators.
No. 12330: EFFA® Tungsten Boat Kit
Same as No. 12320, but without support rod. For use with EFFA® evaporators.
Evaporation Boats
Small:
0.001" thick. Boat area: 1/16" D x 1/8" W x
3/8" L. Overall length
1¼".
No. 12130: Tungsten Boats, pkg/6.
No. 12140: Molybdenum Boats, pkg/6.
No. 52520: Short Heavy Duty Scissors
Suitable for foils and fabrics where short sharp cutting edges are
needed. Chrome-plated steel. 43/8" long. 24mm cutting edge. . . . .here
No. 12370: Aperture Cleaning Boat Kit
Holds 50mm long tungsten boats for heat cleaning disc and strip apertures
where a vacuum is required. Includes three No. 12130 tungsten boats, threaded
support rod, braided lead, and instructions. Can be ordered with an unthreaded
support rod. For use with other evaporators.
. . . . .here
No. 12380: EFFA® Aperture Cleaning Boat Kit
Same as No. 12370, but without support rod. For use with EFFA® evaporators.
. . . .here
No. 12150: Aperture Cleaning Boats
0.001" tungsten. 50 x 5 x 2mm boat. Overall length: 75mm, pkg/3. .
. . .here
No. 12190: Silicon Monoxide Powder
For vacuum evaporation at relatively low temperatures to make thin
films and replicas. Produces clear, strong, structureless films more flexible
and less subject to rupture than carbon films. Vial/3g.
No. 16170: Germanium Chips, 99.9% Pure
For vacuum shadow-casting, box/5g.
