No. 12532: Sputtering Module For EFFA® Vacuum Evaporator
Fits all EFFA® Vacuum Evaporators. Includes sputtering gun, adjustable
sample table, gas metering valve assembly, vacuum interlock switch, high
voltage power supply and instructions. Accepts these targets.
Target not included in price. Can be adapted to other evaporators
. . . . .POR
No. 12550: EFFA® Spring-Loaded Triceps Tweezer
Allows movement in all three planes, plus 360° rotation. For manipulation
of objects without breaking vacuum. Mounted on clear viewing port cover
to fit EFFA® vacuum ports. Approximately 12" long.
No. 12710: EFFA® Evaporator Specimen Holder
Holds ten pin-type mounts in the upper section of EFFA® Evaporators.
Sample height and position are adjustable. Support rods can be assembled
into a longer rod for more vertical adjustment.
.
No. 12750: 12" Accessory Ring
Fits between the bell jar and base plate. Permits EFFA® accessories
to be used with other evaporators. 4" high. One port included. Specify
number of ports desired, maximum of 10.
.
No. 12512: Evaporator Spacer Ring
Fits under the lid or between the sections of No. 12510 EFFA® Evaporator
or No. 12700 Turbo Coater. Increases chamber height by 1".
No. 12540: EFFA® Freeze Drying Stage
For freeze drying small particles. Includes valves, tubing and can
of Refrigerant 134A. Fits EFFA® vacuum ports.
No. 12504: Electrical Port Cover
3¾" diameter aluminum port covers with two 50 amp jacks and O-ring
seal.
No. 12505: Plexiglas Viewing Port Cover
Clear 3¾" diameter port cover with O-ring seal.
No. 12506: Aluminum Port Cover
Plain 3¾" diameter aluminum port cover with O-ring seal.
No. 12508: Air Vent Port Cover
3¾" diameter aluminum port cover with air vent valve and O-ring seal.
No. 12514: O-Ring Replacement Kit
For No. 12500 or 12510 EFFA® Evaporators. Please specify evaporator.
No. 12714: O-Ring Replacement Kit
For No. 12700 EFFA® Turbo II Evaporator.
No. 12515: Diffusion Pump Fluid
Dow Corning 704 diffusion pump fluid. 50cc bottle.
No. 12520: Liquid Nitrogen Cold Trap For EFFA® Evaporator
Diffusion pump cold trap with 7 liter liquid nitrogen reservoir. Fits
the tee over the diffusion pump on all EFFA® No. 12510 Evaporators. Replaces
the standard trap, without adapters or alterations. Improves vacuum from
10-4torr range to 10-5torr
range. Also functions as a cryopump and will operate to the low 10-3
torr range with the diffusion pump shut off. Hold time approximately 72 hours.
. . . .POR
No. 18984: Sigma SQM-160 Thin Film Deposition Monitor
Low cost, easy-to-use instrument.
Two quartz crystal measurement channels.
High quality 2 ppm oscillator.
Two analog outputs for rate/thickness recording.
Displays rate/thickness, frequency, or mass.
RS-232 port and windows software standard.
Send for complete brochure.
Specifications
No. 18983: Cressington Thickness Monitor Crystals. Pkg/10.
No. 18985: Sigma Thickness Monitor Crystals. Pkg/10.
No. 12590: DC Power Supply
A variable voltage power supply with output meter. Standard equipment
with Nos. 12080, 12530 and 12570. Also sold separately. (Output: Up to
300ma @ 12V DC.).
No. 12592: 220V/110V Step Down Transformer For No. 12590.
No. 12040: EFFA® Carbon Rod Sharpener
Produces 1mm diameter straight tip on 1/8" or ¼" carbon rods. Two
durable carbide blades shape the tip. Gauge is included for adjusting the
blade gap. Dust catcher easily removed for cleaning or blade adjustment.
Kit includes blade gauge, 1/8" rod adapter and parts necessary for permanent
mounting.
No. 12041: Replacement Blades for EFFA® Carbon Rod Sharpener, set of 2.
No. 12042: 1/8" Rod Adapter for EFFA® Carbon Rod Sharpener.
No. 12480: EFFA® Electric Carbon Rod Sharpener
The sharpening blade system is the same as No. 12040. Electric drive
makes this device faster and smoother than hand sharpeners. Includes blade
gauge and 1/8" rod adapter.
With Stepdown Transformer for 220V.
No. 12525: Rotary/Tilting Coater For SEM Mounts, Low Profile
A low profile coater for use in EFFA® evaporators or others with restricted
overhead clearance in the bell jar. 2¾" x 5¾" base, 3¾" high. Specify
SEM mount used.
No. 12530: Rotary/Tilting Coater For SEM Mounts
Combines rotation with continuous tilt. Provides SEM specimens with
complete exposure to evaporative coating. 6¼" high. Complete with one
set of mounts and DC power supply. Requires third chamber section for use
in our evaporator. Specify SEM mount used.
No. 12531: Rotary/Tilting Coater, Inverted
For mounting on a post in an inverted position.
No. 12570: Rotary Coating Unit For SEM Mounts
Provides 360° rotation at pre-set tilt angle. Mounted on a bracket
that will fit most evaporator support rods. Complete with one set of SEM
mounts and DC power supply. Specify SEM mounts used.
No. 12080: Rotary Shadower
Provides 360° rotation of specimen at pre-set angle. Holds glass
slides on 3" table. Mounted on a bracket that will fit most evaporator
support rods. Complete with DC power supply.
No. 12081: Replacement Motor
Specify No. 12080, 12530 or 12570.
